Qingdao Running Machine Co.,Ltd
The quality is focused and the price is reasonable.
Add to Cart
Movable Conveyor Belt Jointing Machine with Fast Cooling System
1- Machine Maximum size: from 300MM-6000MM;
2- .Voltage: 220V 380V 415V 660V 50HZ;
3- Fast Cooling time: 15 minutes (from 145 degrees down to 70 degrees or less);
4- Time for temperature raise (from normal temperature to vulcanizing temperature) no more than 25 minutes;
5- The temperature difference of sulfide surface: ±2°c.
6- Temperature adjustment range: 0~300°c.
7- Vulcanizing pressure: 0~2.5 MPa (details refer to users' specifications and factory markings);
8- Time of heat preservation for vulcanizing could be adjusted according to thickness of the rubber belts;
9- Splicing length of rubber conveyor belt for vulcanizing jointing could be connected together by single or several pieces if necessary;
10- rubber conveyor belt as well as tension in kilogram required for vulcanizing jointing when
ordering products.
11- Users could order spare electric pumps additionally according to requirements.
| Model | Width of rubber belt to be joined-up (mm) | Total Power(KW) | Weight of heaviest part (Kg) | Overall dimensions LxWxH(mm) | Total weight (kg) | Control box |
| ZLJ--1200 | 1200 | 16.5 | 69.3 | 1680×830×710 | 900 | 1 |
| ZLJ--1600 | 1600 | 21.1 | 89.7 | 2140×830×800 | 1320 | 1 |
| ZLJ--1800 | 1800 | 23.3 | 89.7 | 2300×830×850 | 1480 | 1 |
Note: of Movable Conveyor Belt Jointing Machine with Fast Cooling System
*********************************************************
When order, pls supply below information, our technician will make a solution for you, or pls choose one model from bottom traditional sizes table
Normal vulcanizer model sheet:
A= Splice Length
B= Bet Width
C=Length of platen along the belt
D= Width of platen
measured square to beltline
E= Bias Ange
F=Width of platen along the belt on bias
Main Componets of Movable Conveyor Belt Jointing Machine with Fast Cooling System
BEAM of Movable Conveyor Belt Jointing Machine with Fast Cooling System
2.
l Tension bolts made of high-strength steel, however, 2 kg less apiece than conventional steel tension bolts.
3. Lightweight aluminum platens use new rapid cooling system within platens.
4. Custom sizes, rectangular configurations and multiple platen arrangements are also available on request.
5. ELECTRONICS CONTROL CABINET
6． Pressure bag system, can used for both water and air, one time molding, without metal frame, light weight, testing pressure out of our factory is 2.5MPA (old design pressure bag fixed with metal frame and bolts, heavy weight)
A. Automatic pressure pump with pressure gauge, allows easy application of pressure up to 200PSI. For steel-cord belting, standard will be auto pressure pump. After use new cooling system in the heating platen, now also use pressure pump for cooling.
B. Cooling pump , when work with air compressor, air pressure, no pressure pump, such cooling pump can used for cooling. (Pls note that, if have any special requirements of the cooling pump working voltage, pls inform us before order, standard voltage is 220V single phase)
C. Manual Pump: Manual water pressure
Usually we provide the packing list as following:
| #1 | Heating plate with build in water cooling device | 2 Pieces | |
| #2 | Almex type pressure bag | 1 Pieces | |
| #3 | Heating insulation plate | 3 Pieces | |
| #4 | Standard Control Box | 1 Sets | |
| #5 | Cross Beams | as vulcanizer | |
| #6 | Ratchet wrench | 2 Handles | |
| #7 | Primary wire/cable with plugs 10 meters | 1 Pieces | |
| #8 | Secondary wire/cable with plugs 5 meters | 2 Pieces | |
| #9 | Electric pump | 1 Set | |
| #10 | High pressure hose | 15Mpa 5 Meters | |
| #11 | Clamp bolt, Nut, Gasket | 10 sets | |
| #12 | Clamp Device (optional) | As request | |